In the US, 50% of people say their garage is the most disorganized and cluttered area in their homes. If this sounds like you, then you might be wondering how to make the most of your space and to have a cleaner look.
In that case, you’re in luck! In this article, we’ll show you how to install overhead garage storage in 5 easy steps.
How to Install Overhead Garage Storage in 5 Easy Steps
1. Prep Work
When it comes to how to build overhead garage storage, you need to first prep the area. Use a level to draw a straight line across your wall so you don’t inadvertently hang your rack crookedly.
You’ll also want to find the studs in your walls. With unpainted garages, it should be easy to find them. Otherwise, you’ll need to use a stud finder.
2. Install the Ledger
Next up in how to make overhead garage storage is to put the ledger along the line you’ve just determined with the level and stud finding. Before you screw in the ledger, use the level one more time to ensure it’s not crooked.
3. Install the Ceiling Cleat
Now, you’ll need to use a level to mark your ceiling. A framing square can come in handy, as it’ll help you mark even lines all across your ceiling. You’ll need to use a stud finder again to find where there are joists.
Once you’ve found the joists, install the ceiling cleat perpendicular to them. If that’s not possible and you need to have them run parallel, you’ll want to install cross-cleats for better stability.
4. Install the Hanger Boards
If they’re not precut, then you’ll want to measure and cut hanger boards. Otherwise, position your boards with them touching the ceiling and install them onto the cleat.
After this, you can install the L-angle on each hanger board and then the joist hangers. These should be done before you install the front joists.
The next steps after these for how to build an overhead garage storage rack are to install the outer L-angles and the finally, the front joist.
5. Install the Floor
Lastly, install the floor for your overhead garage storage. All you’ll have to do is place it over the frame, and climb up to secure it.
Once you’re happy with where it sits, you can then snap lines and then screw in the wood. You’ll want to have screws about 1 foot apart from one another, and they should go into all parts of the rack, including the ledger and all joists.
If all the above seems a bit difficult, then you can always buy a kit for overhead garage storage racks, such as those from www.fleximounts.com. All you’ll need to do is buy some plywood and then just follow the easy instructions.
Install Overhead Garage Storage Easily
After reading this guide, you should now be able to put together overhead garage storage quickly and easily.
Of course, you can go full DIY, as it’s simple enough for even beginners. But to save on time, you should definitely consider purchasing a kit.
If you need more items in your home and would like to save some money, then check out our coupons and deals now!
Leave a Reply